Adam L
New Member
Right, the bottom end needs attention, and to put things simply, I don't want to work on the car because i've spent too much money on it and I simply can't justify spending another penny.
Compression is fine on all cylinders, oil catch tank is also bone dry. Suspected crank journal at fault due to low oil pressure, which was fixed.
The engine spec wasn't shy, it had alot of work done to it, and could be fixed for not alot.
Ported head
Tomei double valve springs
Tomei 262 cams
Tomei adjustable cam pulleys
GReddy 1.2mm headgasket
GT3071R
Am performance 2 1/2'' elbow
Am perforamce 3'' downpipe
3'' decat pipe
5 Zigen fireball cat back system (no longer in production, and with above parts made the exhaust excessively loud, not to my neighbours liking...)
87mm CP forged pistons
Lightened and balanced crank
Eagle forged rods
OS Giken billet flywheel
OS Giken twin plate clutch
HKS front mount intercooler
custom JGY fuel rail
MSD 750cc injectors
Mocal 13 row oil cooler/braided lines
Mocal oil catch tank
Ecu remapped for 1.7 bar on current setup
BLitz dual solenoid boost controller
custom intake pipe with Z32 maf
Z32 Apexi specific airfilter
Every water pipe replaced for silicone item
breather silicone pipes
New plugs
New dizzy cap
New uprated leads
Apexi rad cap
New battery
Brakes:
Hi Spec billet 4 pots with 310mm grooved discs
256mm grooved rear discs
new mintex pads all round
braided lines
Suspension:
Tein adjustable coilovers
Front and rear strut braces
Wheels:
Rota Slipsteam 17x7.5'' in flat black
I had the clocks proffesionally converted to mph and the mileage correctly adjustaed, receipt to prove.
Now, I have receipts for thousands on this car, in excess of £10k, not including the parts I paid cash for
The car also has MOT till April next year and Tax to the same date.
There may be a few parts i've missed off the engine spec, but i'm sure you get the jist.
Ideally i'd want £3.5 for the car as is, otherwise i'll take the engine out and repair it at a later date, which I don't want to do.
I also have another complete standard engine that i'll chuck in with it, clyinder 4 piston let go.
A quick picture of the car when it was at the RR day at EA a few months back...
Compression is fine on all cylinders, oil catch tank is also bone dry. Suspected crank journal at fault due to low oil pressure, which was fixed.
The engine spec wasn't shy, it had alot of work done to it, and could be fixed for not alot.
Ported head
Tomei double valve springs
Tomei 262 cams
Tomei adjustable cam pulleys
GReddy 1.2mm headgasket
GT3071R
Am performance 2 1/2'' elbow
Am perforamce 3'' downpipe
3'' decat pipe
5 Zigen fireball cat back system (no longer in production, and with above parts made the exhaust excessively loud, not to my neighbours liking...)
87mm CP forged pistons
Lightened and balanced crank
Eagle forged rods
OS Giken billet flywheel
OS Giken twin plate clutch
HKS front mount intercooler
custom JGY fuel rail
MSD 750cc injectors
Mocal 13 row oil cooler/braided lines
Mocal oil catch tank
Ecu remapped for 1.7 bar on current setup
BLitz dual solenoid boost controller
custom intake pipe with Z32 maf
Z32 Apexi specific airfilter
Every water pipe replaced for silicone item
breather silicone pipes
New plugs
New dizzy cap
New uprated leads
Apexi rad cap
New battery
Brakes:
Hi Spec billet 4 pots with 310mm grooved discs
256mm grooved rear discs
new mintex pads all round
braided lines
Suspension:
Tein adjustable coilovers
Front and rear strut braces
Wheels:
Rota Slipsteam 17x7.5'' in flat black
I had the clocks proffesionally converted to mph and the mileage correctly adjustaed, receipt to prove.
Now, I have receipts for thousands on this car, in excess of £10k, not including the parts I paid cash for
The car also has MOT till April next year and Tax to the same date.
There may be a few parts i've missed off the engine spec, but i'm sure you get the jist.
Ideally i'd want £3.5 for the car as is, otherwise i'll take the engine out and repair it at a later date, which I don't want to do.
I also have another complete standard engine that i'll chuck in with it, clyinder 4 piston let go.
A quick picture of the car when it was at the RR day at EA a few months back...
Last edited: