ABS sensors handed?

B

blr123

Guest
Hi Guys,

Question, does anyone know if the front ABS sensors are handed ie dedicated left & dedicated right or not :?:

Cheers Bryan
 
coxie

coxie

New Member
yes they are dedicated to one side. the part that goes in the hub has a raised face on it and the part that goes in side has grooves on it, they have to line up, or the abs pump cuts in and the pedal will make a noise and pulse under foot. i have just had this exact same problem only solved by my best mate who works at middlehurst motorsport.
 
P

purplemonster

Guest
well i had a problem with my right hand front sensor .and as i work in the trade i made a daewoo sensor fit it as i get them for naff all in work .


8weeks later and still ok

ROBERT
 
B

blr123

Guest
Soooooooo......Robert you know how to make them fit then eh mmmm :?:

Cheers (make 1 for me) Bryan :wink:
 
coxie

coxie

New Member
to check if the sensors are shagged check them with a multimeter as in the w'shop manual
 
P

purplemonster

Guest
most sensors measure approx 900-1300 ohms

and they also craate a very small voltage when spinning the wheels ,but u may find that a bit hard with an R due to the diffs etc


ROBERT
 
You must log in or register to reply here.
Top