AVCR fitting help

E

Edd

Guest
Right i can't be bothered to read the instructions properly so would someone like to explain where all the bits go and which pipes are where, i can work out how to splice it into the ecu but just want bit of guidance on where all the pipe work goes.

If anyone has any pics of their setup that'd be great

memski Rsnissan etc :wink:
 
Y

youngsyp

Active Member
Right, I put the pressure sensor on the firewall nest to the plenum. Vacumn hose from this T's into the fuel reg vacumn pipe on the end of the fuel rail :D on the right hand side in front of the plenum looking from the front of the car. I put the solenoid on the shelf under the air filter. One end of the vacumn hose goes to the turbo, the other goes to a vacumn take off on the plenum. I ran the cable through a grommet about half way down the firewall to the far right as looking from the front of the car. I mounted the display unit on the dash angled towards me with the cable coming up from the glove box.

Hope this atleast gives you a good idea. Oh, and the wiring as in the book connecting the throttle position not injector signal wire.
 
E

Edd

Guest
thankyou that's a great help mate :D

fitting tomorrow so we'll see how it goes :shock: :lol:
 
E

Edd

Guest
the pic lookec omplicated though, and you know what im like ill plumb it in the wrong pipe or cut the wrong hose and fuck the car :shock: :lol:


ill report tomorrow if its broken :lol: :eek:
 
E

Edd

Guest
what you mean cheque book i'm fitting it with my mate :shock: :? :roll:

hsvr you knoe i do a hell of a lot of work on my car thankyou, just have a tendecy to not have the confidence i'll break something :oops:


although had the turbo off 6 times in last 2 months and only threaded one stud on the head :lol: :oops:
 
E

Edd

Guest
all fitted fine, no problems, thanks to rsnissan for the helpful tips :wink:
 
You must log in or register to reply here.
Top