best rebuilt

[tenfoloten]

what is the best kit to rebuilt my engine:
1- arias piston(86.5 or 87),pauter connecting rods,standard crank with mods
2- kit tomei 2.2L 87mm pistons
???????
how many hp they support??
in more resistant first kit or second?


now..
for the head..
the best is tomei 272 or jun 272??
attend your reply
thanks
bye

 

[Rishi]

The best depends on what you want the engine to do... But then that depends on the turbo you need to use... Which all depends on what power you want to run...

So you need to decide how much power you want... Then you need to find a turbo that will give you that power... Then you need to build an engine to make that power where you want in the rev range...

When you have decided that then you can look at which cams, springs etc you will need to complement that setup...

So forget about brands, profiles and lift until you know the rest of it.. Then look at what you need not just what the companies offer... You may want to take a custom head setup...

And finally TOMEI don't do 272deg cams... They do the 270deg with 12.5mm lift for which they don't supply springs for so you would need to go to Ferrea or custom route... Then some head customisation to allow for such a setup...


Rishi