Engine Dyno's??
- Thread starter Sweeny
- Start date
J
jiw
Guest
Automark in stokesly, thats north east mate, jeff
J
jiw
Guest
i did have a buisiness card for him, i shall have a look around the house when i get home later this evening, jeff.
J
jiw
Guest
Sorry mate you just reminded me, i honestly forgot
i have just found it in the yellow pages:- Automark 01642 714200 Ellerbeck court, stokesley
I have not used him before but he has been mentioned by a lot of people i was recomended his engine dyno for a previous car but i never needed it, let me know how you get on, jeff
i have just found it in the yellow pages:- Automark 01642 714200 Ellerbeck court, stokesley
I have not used him before but he has been mentioned by a lot of people i was recomended his engine dyno for a previous car but i never needed it, let me know how you get on, jeff
Sweeny
New Member
Right, just for future reference and posts, Automark can fit the GTi-R engine to their dyno, but will cost £300 +VAT setting up charge as they dont have the brackets etc. for our engine, plus £100 +VAT per day running charges, plus £50 +VAT per hour labour charges.
So at the cheapest it would be £530
.
Or for a cheaper option, go to Norris Designs and he will run it in and map your Power FC for £400 +VAT.
And the best bit is you get a Flywheel figure 8) .
Cheers.
James.
So at the cheapest it would be £530
.Or for a cheaper option, go to Norris Designs and he will run it in and map your Power FC for £400 +VAT.
And the best bit is you get a Flywheel figure 8) .
Cheers.
James.