GReddy T-67 on a GTi-R

[jap-jet]

Hey guys anyone put one of these on a GTi-R....
Did it fit ok any mods required to make it fit at all?
Im putting it on a trust gtir manifold for a TD06 if anyone can put a pic of it up for me that would be great so people know what sort of manifold i mean that would be good

 

[antilag]

i think theres about 5 with that setup now mate

 

[jonnyboy]

T-67

 

[jap-jet]

hey jonnyboy did you have to modify anything to get it to fit in there?
Is that a trust manifold at all or a custom job?

 

[jonnyboy]

hi jap-jet, it's a g-reddy manifold no mod's just lost 1 fan

 

[antilag]

i put my fan on the other side of the rad i didnt wanna lose it

the last picture is the greddy manifold as it comes i modified it so the turbo sits an inch to the left more parellel and the wastegate goes rite across under the alternator

 

[jap-jet]

It does not come into contact with the block at all?
Can i send some1 a pic of my manifold to see if anyone has the same one?

 

[jap-jet]

the manifold i have is very similar to antilags but no.3 runner moves in behind no.4
Here is a pic of it
http://img6.photobucket.com/albums/v20/ashbhp/jap_jet_mani.jpg

 

[jap-jet]

the manifold i have is very similar to antilags but no.3 runner moves in behind no.4
Here is a pic of it

 

[Anonymous]

i'm going to have to do this one soon.

 

[cmng]

trust manifold for RNN14 have two version
one is clear AC one is no AC

 

[Sirnixalot]

dave i hope you reversed the polarity of the fan when you switched it....(you connected the negative terminal ot positive, etc.)

 

[antilag]

my manifold has had a few changes there has been an inch added in between the flange and were 4 goes into one as well as the wastegate pipe mooved

and yes this turbo hits the block bid time i had to tilt mine out about an inch

 

[jap-jet]

jonnyboy you have a PM...
Anyone ele have to modify there manifold to stop it hitting the block...
Also how did you go about modifying the water lines as this is a oil cooled turbo?