A
Anonymous
Guest
Hello,
I need advise guys... I completely modified my R. At 1.0bar i have 400hp, at 1.4 - 480hp. There are no problems on the dyno I can rev it to 7700rpm and nothing is happening, but when I go on street rocker arm of 2 or 3 cyl always jumps of - this timr it caused bent valve. Please give me advise where it is the problem. Mods in the head are Tomei camshafts intake 270/lift 12.5 exhaust 280/lift 12.5. Do you think for this cams I need springs, retainers as far as Tomei told me it is not necessary.
Please give me some advise...
Regards,
Tadas
1bar=400hp
1.4=480hp
R
I need advise guys... I completely modified my R. At 1.0bar i have 400hp, at 1.4 - 480hp. There are no problems on the dyno I can rev it to 7700rpm and nothing is happening, but when I go on street rocker arm of 2 or 3 cyl always jumps of - this timr it caused bent valve. Please give me advise where it is the problem. Mods in the head are Tomei camshafts intake 270/lift 12.5 exhaust 280/lift 12.5. Do you think for this cams I need springs, retainers as far as Tomei told me it is not necessary.
Please give me some advise...
Regards,
Tadas
1bar=400hp
1.4=480hp
R