HOW DO I GET MORE TORQUE ?

J

jonnyboy

Guest
as the title say's ?

running 417 bhp and 288 lb torque :shock:
 
E

Edd

Guest
I guess it must be fookin quick though 8)

whats it like to drive?
also could run more boost to get more torque :wink:
 
J

jonnyboy

Guest
it feels pretty quick, but i just dont get that kick im looking for..................................more booooooooooost :twisted: :wink:
 
Fast Guy

Fast Guy

Moderators
Staff member
Which is wrong the 417bhp or the 288lb/ft???

Or are you realy making max power at over 7600rpm? :shock:


Cooler charge, better mapping, bigger capacity, longer stroke, higher compression, nos, different cams, better turbo are some ways to get more torque.
 
S

srbpower

Guest
:shock: dan's 200 makes 280 odd bhp on abbey's dynopack, but makes just over 310lb/ft

Si :)
 
J

jonnyboy

Guest
i have hks 264 cam's and vernier pully's fitted. running a motec m48 pro, forged pistons, 600 injector's and a t67 turbo ? i was wondering if the torque could be gained with better mapping and a touch more boost ? currently on 1.5 ?
 
S

srbpower

Guest
srbpower said:
:shock: dan's 200 makes 280 odd bhp on abbey's dynopack, but makes just over 310lb/ft

Si :)
Click to expand...
Decent engine management mate, that's what it is :D
 
G

geetee

Active Member
quick apart from tring to accelerate up hill eh!

good off the lights?

what mods do u have and so u have a lightend flywheel?

Chers
GeeTee 8)
 
Sweeny

Sweeny

New Member
My old R was running 287lb of trq on standard everything apart from unichip & hks cams n pulleys on 1.2 bar! Sickboy has it now.

Sounds like it desperately needs mapping properly. I know a motec dealer, whos very good at mapping.

Ive pm'd you the details.
 
O

Odin

Guest
jonnyboy said:
as the title say's ?

running 417 bhp and 288 lb torque :shock:
Click to expand...
I have the m48 pro and got 304lb's of torque at 1.2 bar on
the standard turbo and engine with 311 bhp :wink: so with
your setup you should see a lot more than that :? .



rob
 
Nad

Nad

Active Member
Wrong spec of turbo possibly. If the exhaust side is too big could be losing torque. Could get a smaller one but then u will start getting compressor surge.

Nad[/code]
 
C

cmng

New Member
Nad said:
Wrong spec of turbo possibly. If the exhaust side is too big could be losing torque. Could get a smaller one but then u will start getting compressor surge.

Nad[/code]
Click to expand...
T67..
it much bigger that T06 25G. may that reason
unless you have 2.2 Stroker kit
 
You must log in or register to reply here.
Top