oil feed

nimhbk

New Member
there is a pipe which, is located about an inch higher and about three inches to the right of the actuator,(also next to a large engraved number) is it a oil feed of some sort (it ends in like a kind fuel of conector, a bronse sort of nut and bolt) I ask as i have a small oil leak and not to sure where from it's covered in small amounts the actuator but mainly on the big pipe feed that goes to the air filter and the surrounding vacume lines?
 

nimhbk

New Member
it looks like it goes either to the gearbox or near the bottom of the engine, its right under (well about 3") where the water enters the engine under the dizzy cap.
 

nimhbk

New Member

^
^
its the pipe which goes into the hole at the top of that rusty gadget with the two nuts under the water feed,
 
O

Odin

Guest
That s the clutch slave cylinder matey.

Probably need a new hose or the cylinder is leaking and will need replacing or a new seal kit try doing up the pipe first and see if it fixes it.


Rob
 
Top