Pads discs and starter motor

[johnwills]

Hi everyone new to pulsar so please bare with me I have a pulsar which need pads and discs all I know is they are billet 300mm brakes any ideas where to get pads and discs. Also starter motor is going and I have heard these are difficult to change any ideas the best person to use as I am in West Midlands also just generally who is good to use who maybe fairly close for performance upgrades ect





thanks

 

[PobodY]

West Midlands where? - There are a few people around Junction 10 of the M6... or at least there used to be.

Starter motor is easy. - I changed mine last time without taking anything off; just reached through and undid it, slid the new one it and connected it up.

Post a picture of your discs and pads; chances are that someone will know what they are (and what to order).

 

[johnwills]

Thanks yeah I'm only just 15 mins from junction 10 m6

 

[PobodY]

This is the starter I bought last time:
http://www.startermotor-alternator-...--14kw-starter-motor--20-gti-s1693-3286-p.asp

Like I said; it was pretty easy to take the two bolts out (through the gearbox casing), swap them over, and connect the new one.

 

[splmum]

This is the starter I bought last time:
http://www.startermotor-alternator-...--14kw-starter-motor--20-gti-s1693-3286-p.asp

Like I said; it was pretty easy to take the two bolts out (through the gearbox casing), swap them over, and connect the new one.

Only if there is no 'Y' bracket George, the 'y' bracket is the time killer and obstruction.

 

[PobodY]

Only if there is no 'Y' bracket George, the 'y' bracket is the time killer and obstruction.

Good point. - Clearly I don't got one, but that would get in the way.