Right I have had the 34 code now since a bought the car, I bought a new knock sensor and when i went to fit it i found it at the front of the engine block on the left hand side.
Anyway after replacing it i still have the 34 code - Now the previous owner had rewired the knock sensor and i think this is where the problem is.
There is one wire which i believe is the earth which is a attached to a stud on the rocker cover the other goes back to the 27 pin on the ecu. There is then another purple wire attached which part of the wiring loom which deappears off????
Help me!!!
When i disconnected all the wire and left just the white coming from pin 27 only getting just under 5volts dc
Also with the knock sensor removed across both pins i have 550 ohms
Hope this makes sense to someone
Anyway after replacing it i still have the 34 code - Now the previous owner had rewired the knock sensor and i think this is where the problem is.
There is one wire which i believe is the earth which is a attached to a stud on the rocker cover the other goes back to the 27 pin on the ecu. There is then another purple wire attached which part of the wiring loom which deappears off????
Help me!!!
When i disconnected all the wire and left just the white coming from pin 27 only getting just under 5volts dc
Also with the knock sensor removed across both pins i have 550 ohms
Hope this makes sense to someone