Matt Evans
Member
Breaking Rolling Shell SOON!
NOW BREAKING!!!
Hey all. I will soon have up for sale my Black 'J' plate rolling shell (sun roof model). In South Wales.
The car has covered about 115k and is admittedly a bit shabby. The rear arches are quite scabby, but I've seen worse. Plus, the beam that the battery tray is attached to would require some welding, and also a new 'H' frame for the front would be required (about £70 from ebay) as I cut the old cross beam to aid engine removal. This is of course, only required if you wish to make the car road worthy again. It sounds like a lot of work, but the car is definitely not beyond repair.
It comes with all standard GTiR running gear, brakes etc.
Parts/Panels included are...
Grooved front discs.
Refurbed rear calipers (about 18 months ago, and the car hasn't been used for about 10 months).
GAB suspension all around. All in good condition.
Standard ARBs but rear has poly bushes.
Full interior, seats, cards etc, but no clocks. Mian dash cowl and console surrounds are present just no clocks.
Alternator. A bit shabby looking but worked perfectly fine when on the car
Boot lid, with spoiler.
Passenger door. Good condition.
Drivers door. damaged, but ok for transportation of car.
Rear bumper. Good condition.
Front bumper. Good condition with Nismo spot lamps fitted. Lamps also in Good condition.
Front bumper bar. (Hasn't been cut or modded in any way.)
All lights and indicator lenses are on car, but drivers head lamp lense has a very tiny hole through it, possibly from a stone impact.
Full car wiring loom. Engine loom NOT with car.
Prop. Shaft.
Air Con. Rad, pump etc.
Parcel shelf.
Mongoose 2.5" Exhaust. Front section to Cat and Tail piece only (3.5" inward rolled).
OZ Polaris wheels x4. 16" with Falken rubber. 2 good tyres, 2 not very good. Wheels are in ok condition. One is worse than the rest and one is a lot better. The other 2 have scuffs around the rims etc. Plus I've actually started to refurb one of the wheels.
Toad Ai600 Cat.1 Alarm/Immob. With spare key fob and paperwork.
As you can see ther are plenty of good parts and panels to be sold-on, but if you'd prefer to put the car back on the road, the following parts will be required as they don't come with the car.
Parts NOT with car...
Engine, Box, Rad, etc.
Front drive shafts.
ECU.
Fuel Pump.
Bonnet.
Dash Clocks.
Grill.
Strip underneath grill.
I'm looking for £500 O.V.N.O. for the shell as is, with the parts mentioned earlier on in the post. I have no intention of breaking the car at all, so please don't ask for specific parts as I just want the whole lot gone in one go. Any parts lying around once the car is gone I will post up, if there is anything worth a mention.
I'll be posting pics up of the car and the wheels as soon as I can, and if anyone wants any more info or any specific pics then please let me know.
It really wouldn't take a lot to put this car on the road again, I just need it out of the way so I can complete the rebuild of my other shell.
Have fun all, catch ya later!
Matt.
NOW BREAKING!!!
Hey all. I will soon have up for sale my Black 'J' plate rolling shell (sun roof model). In South Wales.
The car has covered about 115k and is admittedly a bit shabby. The rear arches are quite scabby, but I've seen worse. Plus, the beam that the battery tray is attached to would require some welding, and also a new 'H' frame for the front would be required (about £70 from ebay) as I cut the old cross beam to aid engine removal. This is of course, only required if you wish to make the car road worthy again. It sounds like a lot of work, but the car is definitely not beyond repair.
It comes with all standard GTiR running gear, brakes etc.
Parts/Panels included are...
Grooved front discs.
Refurbed rear calipers (about 18 months ago, and the car hasn't been used for about 10 months).
GAB suspension all around. All in good condition.
Standard ARBs but rear has poly bushes.
Full interior, seats, cards etc, but no clocks. Mian dash cowl and console surrounds are present just no clocks.
Alternator. A bit shabby looking but worked perfectly fine when on the car
Boot lid, with spoiler.
Passenger door. Good condition.
Drivers door. damaged, but ok for transportation of car.
Rear bumper. Good condition.
Front bumper. Good condition with Nismo spot lamps fitted. Lamps also in Good condition.
Front bumper bar. (Hasn't been cut or modded in any way.)
All lights and indicator lenses are on car, but drivers head lamp lense has a very tiny hole through it, possibly from a stone impact.
Full car wiring loom. Engine loom NOT with car.
Prop. Shaft.
Air Con. Rad, pump etc.
Parcel shelf.
Mongoose 2.5" Exhaust. Front section to Cat and Tail piece only (3.5" inward rolled).
OZ Polaris wheels x4. 16" with Falken rubber. 2 good tyres, 2 not very good. Wheels are in ok condition. One is worse than the rest and one is a lot better. The other 2 have scuffs around the rims etc. Plus I've actually started to refurb one of the wheels.
Toad Ai600 Cat.1 Alarm/Immob. With spare key fob and paperwork.
As you can see ther are plenty of good parts and panels to be sold-on, but if you'd prefer to put the car back on the road, the following parts will be required as they don't come with the car.
Parts NOT with car...
Engine, Box, Rad, etc.
Front drive shafts.
ECU.
Fuel Pump.
Bonnet.
Dash Clocks.
Grill.
Strip underneath grill.
I'm looking for £500 O.V.N.O. for the shell as is, with the parts mentioned earlier on in the post. I have no intention of breaking the car at all, so please don't ask for specific parts as I just want the whole lot gone in one go. Any parts lying around once the car is gone I will post up, if there is anything worth a mention.
I'll be posting pics up of the car and the wheels as soon as I can, and if anyone wants any more info or any specific pics then please let me know.
It really wouldn't take a lot to put this car on the road again, I just need it out of the way so I can complete the rebuild of my other shell.
Have fun all, catch ya later!
Matt.
Last edited:
