Stoping, Please read if u have aftermarket brakes and rotors

[Anonymous]

Ok, i know brakes have been discussed alot but i couldnt find anything about wheel sizes also...

I have 16 inch wheels and there is around about 300-320mm clearance

i want to get this brake upgrade done asap, or atleast get the parts soon.

i would like to go with ap stuff.

CP3047-276/7
i am guessing that 285mm discs would fit?? or could i possibly fit 290mm?

 

[Mr GTiR]

it's the size of the caliper and also if there is enough clerance btween the caliper and wheel that is important.

i've got 310mm rotors on mine and am looking at getting 16" as there seems to be loads of room. Also, running the new Willwood Dynalite II caliper which is a lot smaller than most 4 pots but still 'bites' very very well!!

 

[Odin]

I have 304mm disc's with my AP's running 16's


part number for the disc's is.

2261-572
-573

Hope this helps matey .


rob

 

[gtir303]

hello mate try DBA in austrailia i just got my kit from them nearly half the price of the other kits and does the same job

 

[Sirnixalot]

it will probably come up to the same price....rotors are heavy bastards.

Ive got Hi-spec 300mm Billet 4 kit...fits with about 1cm clearance on the top of the caliper and about 5mm clearance on the wheel spokes (33mm offset Volk TE37's

 

[Anonymous]

hello mate try DBA in austrailia i just got my kit from them nearly half the price of the other kits and does the same job

its not costing me a thing.

so i am getting the gucci shit.

 

[Anonymous]

I have 304mm disc's with my AP's running 16's


part number for the disc's is.

2261-572
-573

Hope this helps matey .


rob

cheers rob,

i think i am going to go for 295mm rotors and CP5100 calipers