Stroker kit question

[Fubawu]

Hi


Looking into upgrading the internals of my R. What parts should I look at upgrading
when going to a stroker kit? I am just trying to figure out my budget and locate hidden costs I might not of thought of.

As of right now I have

stroker kit 2.3 91m Crank 89m pistons.
ACL Race Series bearings
injectors 565CC
Apex FC
Fuel pump GTR
Cams
Oil pump
Water Pump
Tuning costs
Install cost
Head gasket


Thanks
John

 

[CanadianR]

what are the GTR fuel pumps rated at?

would a walbro or bosche do the trick?

did you sort out the problems you were having with the car lately?

 

[Fubawu]

I have not sorted the problems yet, I just thought if it comes down to a rebuild I want to be ready

 

[Rishi]

Thats a fairly botched and half hearted list to be honest.. Not sure you have thought this through properly..

 

[Fubawu]

Thanks for the insight...Not thinking it through? This is why I am asking the question. The list is half hearted I just want to know what parts should be upgraded along with the kit.

 

[Fubawu]

Will the oil pan need to be modified? Also will I need sleves if I go with a 89mm piston?

 

[Mr GTiR]

Head studs
Adjustable cam pullies
Porting the head and get the valves thripple cut
Port matching of inlet and outlet
New valves and springs depending on how wild your cams are and rocker stoppers
Bronze exhaust valve guides
Bin the 565cc injectros and get some 700cc or 800cc
Z32 MAF
ARP cradle bolts
Forge pullies
Get the bottom end lightened and fully balanced
Lightened flywheel
New Chain, chain guides, tensioner
New water hoses round the back of the block
Renew your starter motor while it's out
Big ass turbo
4 branch equal lenth manifold
EGT
Custom down pipe and external wastegate with screamer pipe

Do you want me to stop? How deep are your pockets and what spec do you want? if your going to stroke the engine at least build it for big BHP!

 

[Fubawu]

Thanks for the list
Turbo will be upgraded,
Have the MAF

Things I did not think of
ARP cradle bolts
pullies
flywheel
new chain,guide,tensioner
starter
manifold
I am not sure if the pockets are deep enough

 

[CanadianR]

I am not sure if the pockets are deep enough

they hardly ever are for anybody.:twisted:

 

[nismoboy]

you will deffo need liners.