Turbo elbow
- Thread starter STU666V
- Start date
ive got AM performance one, but has built in screamer pipe, very lound even on tickover!!! (as main outlet leaks into screamer, sounds like tractor...)
good for power though as got 326bhp and 325ft/lb at 1.2 bar on std turbo etc
(also good for unwanted chav attention, hence why i swapped back to std elbow!)
guess ive sold it to you?
good for power though as got 326bhp and 325ft/lb at 1.2 bar on std turbo etc
(also good for unwanted chav attention, hence why i swapped back to std elbow!)
guess ive sold it to you?
Last edited:
Davie Houston
Member
Good bit of kit this is!!!
I have the none screamer version and deffo feel the difference in power in the tin can!!!
I have the none screamer version and deffo feel the difference in power in the tin can!!!
people keep asking me if im selling, but I decided to take advice and get screamer welded back in, as power gain is good
so heres the original thread for those interested
http://www.gtiroc.com/forums/showthread.php?t=47029
so heres the original thread for those interested
http://www.gtiroc.com/forums/showthread.php?t=47029
DRC
Member
I had mine done at a place called "Big city tyers" in Leicester. It is much better to drive on a day to day basis up to about 1.2 bar . BUT i have to say when i up the boost to 1.5 bar it does feel quite restricted now.
Where as before it would make such a noise but god it would go!!!!!!!
I think this restriction is due to the angle the pipe has been welded into the main exhaust.
So time for a new one.............
Anyone point me in the right direction?
Where as before it would make such a noise but god it would go!!!!!!!
I think this restriction is due to the angle the pipe has been welded into the main exhaust.
So time for a new one.............
Anyone point me in the right direction?