Trip
New Member
I am in a middle in doing my valve clearance and got these numbers.
Intake : 0.20 - 0.18 ¦ 0.12 - 0.15 ¦ 0.16 - 0.23 ¦ 0.27 - 0.21
Exhaust : 0.14 - 0.08 ¦ 0.12 - 0.16 ¦ 0.23 - 0.22 ¦ 0.20 - 0.16
Clearance was done between rocker and cam at around 15Deg C using 2 feeler gauges on each side of the rocker (as described in the manual).
I read bob's thread how to get rid of the play of the high numbers but what should i do to those numbers below 0.15mm (4 in total) ?
What is the tolerance factor or should they be 100% accurate 0.15mm
Intake : 0.20 - 0.18 ¦ 0.12 - 0.15 ¦ 0.16 - 0.23 ¦ 0.27 - 0.21
Exhaust : 0.14 - 0.08 ¦ 0.12 - 0.16 ¦ 0.23 - 0.22 ¦ 0.20 - 0.16
Clearance was done between rocker and cam at around 15Deg C using 2 feeler gauges on each side of the rocker (as described in the manual).
I read bob's thread how to get rid of the play of the high numbers but what should i do to those numbers below 0.15mm (4 in total) ?
What is the tolerance factor or should they be 100% accurate 0.15mm