WHATS BEST

[gtir303]

WHAT IS BEST
APEXI SAFC OR
GREDDY EMANAGE
I HAVE A APEXI AVCR BUT WANT TO CONTROL THE FUEL BETTER SO COULD DO WITH SOME HELP

 

[Davey]

e-manage is best i think m8, cos it does fuelling and ignition timing iirc, like a unichip, plus, it means your car wont look like blackpool illuminations with all that apexi stuff in there!

 

[mattygti-r]

swings and roundabouts really,

id prb go for the SAFC2 easier to install , easier to "rejig" but just depends

matt

 

[Rishi]

I'm sure that the e-manage has far more mapping points and so will give a better fuel map and help squeeze out those extra horses... Also I think it can control ignition timing and bigger injectors too...???


Rishi

 

[Sirnixalot]

emanage is better. Its a little ore wires to install and solder but thats about the only downside.

 

[mattygti-r]

yes ur correct basically

emanage - hassle setting up touch more expensive really do need a 4wd rr to set up but more exclusive

safc2 - easier to set up, DIY job really, but looks so much nicer than the emanage

 

[skiddusmarkus]

Moved to the appropriate forum.

 

[GINGA]

Emanage is far superior in everyway really if you can afford it spend the little extra and get the emanage or better still get a power fc again more expensive but better than a emanage was its a direct replacement unit so no cutting into wires etc

safc2 - easier to set up, DIY job really,

emanage is just the same as the s-afc as it still needs slicing into the original wiring and the s-afc still needs setting up at a tuner really as its not really a diy job to set up unless you have and the right equipment eg proper wideband afr gauge and det cans etc

 

[Mr Overboooost]

emanage is better. Its a little ore wires to install and solder but thats about the only downside.

not as many wires now to solder as using one loom to do the job of the injector and ignition harness


cheers
gary

 

[gtir303]

who on the site is running an e-manage

 

[skiddusmarkus]

Ashills&Ripple I think.

 

[GINGA]

Also have a word with Ashills as he may be able to sort you out with the emanage at a nice price

 

[Mr Overboooost]

as from yesterday me aswell

cheers
gary

 

[mattygti-r]

or i can sort u out with either emange or safc2 or any other jdm parts to be honest.

ive just done a jap order for this week thou today

 

[gtir303]

how much do u them both for

cheers

carl

 

[mattygti-r]

pm me with what u require mate

 

[Mr Overboooost]

just so you all know you no longer need the two looms you normally buy with the e-manage ie ignition/injector as there is now a easier way to do it . 8)
i believe i am the first to have it done this way aswell unless someone else has already. :lol:

only one loom so it takes less time to install which means less man hours to fit so it makes the kit a bit cheaper than before so i am told.


cheers
gary

 

[gtir303]

after looking in to it and everyones help i think it will have to be
GREDDY E-MANAGE
just got to find one cheap :lol:

 

[Mr Overboooost]

after looking in to it and everyones help i think it will have to be
GREDDY E-MANAGE
just got to find one cheap :lol:

if you are going for the e manage get the profec e-01 aswell as it controlls boost and you can adjust the settings on the e manage aswell with it.

cheers
gary

 

[gtir303]

BUT I ALREADY HAVE A APEXI AVC_R