B
blr123
Guest
I've about £200 or so buck shee any suggestions for mods[?]
Cheers Bryan
Cheers Bryan
M
Mr Overboooost
Guest
hmm you wont get a lot for £200 unless you can find some second hand bits going cheap.[
]
you might get a air filter and a strut brace for about £200.[]
cheers
gary[]
]you might get a air filter and a strut brace for about £200.[
]cheers
gary[
]
A
Anonymous
Guest
quote:Originally posted by blr123
I've about £200 or so buck shee any suggestions for mods[?]
something shiny for the engine bay.
nice new steering wheel.
colour coded samco hoses.
I've about £200 or so buck shee any suggestions for mods[?]
something shiny for the engine bay.
nice new steering wheel.
colour coded samco hoses.
B
blr123
Guest
Yep! you're rite Gary, can't get a lot for a couple of hundred but hoses Hmmmmm........that's a good idea I think that's the way I'll go, any idea of wheres' the best places and how much[?]
I might even be able to get 20legacys' Bailleys' Twin Piston D/V[]
Cheers guys Bryan
I might even be able to get 20legacys' Bailleys' Twin Piston D/V[
]Cheers guys Bryan
J
jasegould
Guest
Bleed valve and boost gauge if u havent already got one, and air filter...that should cost about £200
Now with Vitamin C!
Now with Vitamin C!
S
srbpower
Guest
Air Filter and front pads? []
Si []
]Si [
]
B
blr123
Guest
Hi guys,
The stuff is for the young lad and his car has a filter, boost gauge and I've just bought The Great Ones (Jamie's) standard discs and pads so he's OK there.
I'm not sure about a bleed valve, mainly because I never see the car to check I here it but rarely do I actually see it.
Cheers Bryan
The stuff is for the young lad and his car has a filter, boost gauge and I've just bought The Great Ones (Jamie's) standard discs and pads so he's OK there.
I'm not sure about a bleed valve, mainly because I never see the car to check I here it but rarely do I actually see it.
Cheers Bryan
S
srbpower
Guest
Oil pressure and temp guage then? Or possibly EGT?
Better to be safe [] than sorry []
Si []
Better to be safe [
] than sorry []Si [
]
chrisniss91
Active Member
Apexi fuel controller for a bit over £200
A
AZ STE
Guest
Fit Powerstations bumpsteer kit,Its the best mod ive done without a doubt[]
A.....Z Ste
]A.....Z Ste
B
blr123
Guest
How much was that AZste[?]
Cheers Bryan
Cheers Bryan
A
AZ STE
Guest
Bryan,
www.powerstation.org.uk/inhouse.asp its £200 you dont need to go down the lazer alignment i got mine lazer tracked for £10 fitting is easy do yourself job.The difference it makes on handling is excellent.As you normally turn into a corner the car dips in as the weight of the engine and track rod end lets it do so.fitting the rose joint units lets it sit practically square around corners[]
A.....Z Ste
www.powerstation.org.uk/inhouse.asp its £200 you dont need to go down the lazer alignment i got mine lazer tracked for £10 fitting is easy do yourself job.The difference it makes on handling is excellent.As you normally turn into a corner the car dips in as the weight of the engine and track rod end lets it do so.fitting the rose joint units lets it sit practically square around corners[
]A.....Z Ste