mightydquinn
Member
Hello everyone, I was wondering if anyone new if alloys off a vauxhall astra would fit, I know there 4 x 100 and the offset is still betwwen 35-45, but was wondering about the bore??
Thanks Chris
Thanks Chris
if the offset and stud patern is the same shouldnt be any issues. What you got planned ???
Is that raelly that important? I've run without them for 5/6 years without a noticeable prob.And if the center hole is too big you'll need to find/ have made centering rings.
Yes it is that important.Is that raelly that important? I've run without them for 5/6 years without a noticeable prob.
I just tighten the wheel nuts bit by bit and opposites and because the nits and wheels are tapered it pulls the wheel central.
Yep, that's what can happen.:lol:I tried that... and sheared a wheel stud for my efforts. The spiggot rings are quite cheap on eBay, you just need to know what sizes you need.
fitting the rings should cure it....if the wheel is balanced (and round):roll:I've always had a slight wheel wobble problem, noticed the other day that i was missing a spigot ring on the front. I ran the car without any spigot rings as i needed to use the other for reference. Made the wobble ten times worse.
I have replacements waiting to be fitted when i get home, hoping they solve the problem!