quaffe, how to tell?

STU666V

Active Member
Hi All,

Can you tell it's quaffe by just looking at the box (turning it etc) or can you tell once you open her up?

Cheers for any info!
 

boost

Member
open up the oil filler cap and look into the gbox you should be able to see 4th gear, im not sure how to tell apart from splitting it.. another way is to give it beans and if it doesnt brake at high torque then you must have one...as the standard ones are not as strong
 

STU666V

Active Member
(thinking in buying one?)
But my one is a standard one and thats been fine too
been launching it for 4 years
 

stevepudney

GTiROC CHAIRMAN
Staff member
The gearchange should feel slightly tighter compared to standard box, the gear ratio is slightly shorter apart from 5 which is the same is and they have a tendency to whine a little more than the standard box in all gears.........

Also sometimes you might see little tell tale signs of visible silicone gasket sealant round the gear casing joints
 

ChrisS

New Member
The gearchange should feel slightly tighter compared to standard box, the gear ratio is slightly shorter apart from 5 which is the same is and they have a tendency to whine a little more than the standard box in all gears.........

Also sometimes you might see little tell tale signs of visible silicone gasket sealant round the gear casing joints
1st is longer. you should get 35 to 40 ish from first gear which you wont from a std. the whine is certainly noticable.
 

red reading

Active Member
that's only any good knowing that noise when it's fitted (and fucked bearing's sound similar too), if it's sitting on a garage floor looking at you will it whine then!! lol
 

Braveheart

New Member
that's only any good knowing that noise when it's fitted (and fucked bearing's sound similar too), if it's sitting on a garage floor looking at you will it whine then!! lol
Think Stu would hear the wife whine much more than a lump of a box delivered... lol
 

stevepudney

GTiROC CHAIRMAN
Staff member
that's only any good knowing that noise when it's fitted (and fucked bearing's sound similar too), if it's sitting on a garage floor looking at you will it whine then!! lol
Very true :lol:

if it's on the floor, split the box and take some pictures so the gearset can be compared to a standard one as you can definitely tell physical differences between the 2....
 

STU666V

Active Member
Thanks lads.

Think the wife would slap me ;-)
Can just say a swapped it for some parts i had ;-)
 
Top