im still having the problem with the fans not working when temp get hot... my temp gauge will go all the way to the top and nothing no fans will turn on... i have replaced the temp sensor the 2 pin with a red connection on it and also the relay but no joy... if i bridge the terminals in the relay socket i can get them to turn on, so i know that they do work...
when engine is 1st started it will backfire when i get to the top end of the revs before changing gear and wont idle less than 12000 rpm then once it has been run for say 10 mins it will drop the idle down to 1000 rpm but it will then fluctuate between 1000 - 12000 rpm... am i right in saying that this could also be down to the temp sensor? is the ecu not nowing the right temp and throwing in more fuel?
has anyone got a straight forward wire diagram so i could rewire the sensor straight back to the ecu?
i better add that the idle adjust screw is wound all the way in and at its lowest...
cheers guyz
when engine is 1st started it will backfire when i get to the top end of the revs before changing gear and wont idle less than 12000 rpm then once it has been run for say 10 mins it will drop the idle down to 1000 rpm but it will then fluctuate between 1000 - 12000 rpm... am i right in saying that this could also be down to the temp sensor? is the ecu not nowing the right temp and throwing in more fuel?
has anyone got a straight forward wire diagram so i could rewire the sensor straight back to the ecu?
i better add that the idle adjust screw is wound all the way in and at its lowest...
cheers guyz