red reading
Active Member
Piper 280 cams and springs,
ported/polished head,
rocker stoppers,
stainless one piece valves,
vernier sprockets,
lightened crank and balance'd,
standard bore cp pistons
carillo rods
acl bearings
polish the inside of the block
cosworth 86.5 mm gasket (thickness to suit needs)
protech manifold
arp main cap bolts
raceware head stud kit
new oil pump
new water pump with under drive pulley
new under drive crank pully
over sized alternator pully
gt35/40 turbo
1000cc injectors
ngk heat range 10.5 plugs
o2 inlet manifold and 100mm throttle body
4" exhaust
carbon twin plate clutch
ppg gearset and final drive with welded diff and braced gearbox and taper to ball bearing conversion
2x bosch 044 and custom fuel rail,swirl pots etc.
syvec or motec ecu with all the options
650bhp, 500lbft torque, 8500rpm min rev limit and about £25000 (just in parts!) to build should net mid 9 on the quater mile and about 200mph over 1 mile.
Ps standard rods have been used to in excess of 500bhp on a few cars now, revs kill rods not power....... unless you own a earley evo.
ported/polished head,
rocker stoppers,
stainless one piece valves,
vernier sprockets,
lightened crank and balance'd,
standard bore cp pistons
carillo rods
acl bearings
polish the inside of the block
cosworth 86.5 mm gasket (thickness to suit needs)
protech manifold
arp main cap bolts
raceware head stud kit
new oil pump
new water pump with under drive pulley
new under drive crank pully
over sized alternator pully
gt35/40 turbo
1000cc injectors
ngk heat range 10.5 plugs
o2 inlet manifold and 100mm throttle body
4" exhaust
carbon twin plate clutch
ppg gearset and final drive with welded diff and braced gearbox and taper to ball bearing conversion
2x bosch 044 and custom fuel rail,swirl pots etc.
syvec or motec ecu with all the options
650bhp, 500lbft torque, 8500rpm min rev limit and about £25000 (just in parts!) to build should net mid 9 on the quater mile and about 200mph over 1 mile.
Ps standard rods have been used to in excess of 500bhp on a few cars now, revs kill rods not power....... unless you own a earley evo.