Hey guys, I bought a bunch of parts to get me around 300-350hp, including an Apexi Power FC. I read up online about how to install the PFC and how to initialize and do the 30 minute idle learn setup. I bought the PFC used from Bob at GTi-r-us about a year ago and he said that the previous owner was running a big tune with a good bit of hp. So I would need to reset the PFC when I installed on my car as all I have right now is a fmic and exhaust. I installed the PFC and the car started fine but hunts for the idle during the entire 30 minute setup. After 30 minutes the idle is still crappy and it runs extremely rich and I think the knock is going through the roof, especially when I give it a little rev. The knock bar on the controller goes up with the revs of the engine and the engine revs really badly with sputtering and backfiring. The car runs fine with the stock ECU except for it runs really rich even with the stock ECU. I was going to re-initialize the PFC and try again but my neighbor started complaining that the petrol fumes were gassing out his house!! Anyway, I'm going to take the Pulsar to a tuner to tune the PFC but I would like to have as many things as I can installed before I get there as to cut down price. Anybody got any suggestions??
Thanks
Thanks